Industrial Battery charging simulator

With our Industrial Battery Simulator you can achive:

Improved battery performance: By carefully controlling the charging process, batteries can be charged more efficiently and with less strain, which can extend their lifespan and improve their overall performance.
Energy savings: Optimized charging can help to reduce energy waste, as the charging process can be tailored to the specific needs of the battery and the electrical system it is used in. This can help to lower energy costs and reduce the environmental impact of industrial operations.
Increased reliability: Properly charging industrial batteries can help to ensure that they are always ready for use, reducing the risk of downtime or other disruptions caused by dead or failing batteries.
Overall, optimizing the charging of industrial batteries can help to improve their performance, save energy, and increase the reliability of the systems they are used in. This can be achieved through the use of state of charge (SOC) calculations, which allow the charging process to be tailored to the specific needs of the battery. SOC calculations are based on measurements of the battery’s current charge level and its charging and discharging characteristics, and can be used to determine the optimal charging strategy for a given battery and application.

What are the benefits of optimizing the charging of industrial batteries ?

Battery simulators are devices that can mimic the behavior of a battery, allowing engineers and researchers to test the performance of electrical systems without the need for a physical battery. This can be useful for a variety of reasons, including:

  • Testing the performance of a system under different battery conditions, such as different levels of charge or discharge, without having to physically change the battery.
  • Allowing researchers to study the effects of battery failure on a system, without damaging a physical battery.
  • Providing a more controlled and safe environment for testing, as battery simulators do not pose the same safety risks as physical batteries.
  • Saving time and money by eliminating the need to purchase and maintain physical batteries for testing purposes.

Overall, battery simulators can be a valuable tool for the industry, helping researchers and engineers to more efficiently and effectively test the performance of electrical systems that rely on batteries.

Industrial Battery charging simulator
Industrial Battery charging simulator

State of charge in our battery calculator

The state of charge (SOC) of a battery is a measure of how much charge is stored in the battery at a given time. It is typically expressed as a percentage of the battery’s maximum capacity, and can be calculated by dividing the current charge level of the battery by its maximum capacity and multiplying by 100.

The SOC of a battery will change over time depending on how it is used. For example, if a battery is being discharged (i.e. used to power a device), its SOC will decrease. On the other hand, if a battery is being charged, its SOC will increase. The rate at which the SOC changes will depend on the power level at which the battery is being charged or discharged, as well as the type of power source being used.

SOC of a battery is needed to charge properly

For example, a battery being charged with a high-power source (such as a fast charger) will have a higher rate of SOC increase than a battery being charged with a low-power source (such as a solar panel). Similarly, a battery being discharged at a high power level (such as when powering a high-demand device) will have a higher rate of SOC decrease than a battery being discharged at a low power level (such as when powering a low-demand device).

Overall, the SOC of a battery will change over time in relation to the power level at which it is being charged or discharged, as well as the type of power source being used. By monitoring the SOC of a battery, it is possible to determine its current charge level and predict its future performance.

battery_simulator3
Industrial Battery charging simulator

Type of battery beeing charged also affects charging time

The charging current also plays a role in determining the time it takes for a battery to reach a particular SOC. Higher charging currents will result in faster charging times, as more charge is being added to the battery per unit of time. However, charging a battery with too high of a current can be damaging, so it is important to use a charging current that is appropriate for the battery being charged.

 

The type of battery being charged can also affect the charging time. Different types of batteries have different charging characteristics, and some may be more efficient at storing charge than others. For example, lithium-ion batteries are known for their fast charging times, while lead-acid batteries may take longer to reach a full charge.

Optimize the performance with the Wiferion battery calculator

Overall, the time it takes for a battery to reach a particular SOC will depend on a variety of factors, including the type of battery, the charging current, and the battery capacity. By carefully considering these factors and selecting the appropriate charging conditions, it is possible to optimize the charging process and maximize the performance of the battery. With our Industrial Battery Charging Simulator you`ll optimize your battery performance and reliability

Products of Wiferion

etaLINK 3000

The inductive charging station with 3kW

etaLINK 3000 - industrial wireless power - industrielles induktives laden - industrial wireless charging - ifoy winner - handling award winner
etaLINK 12000

Charge industrial trucks with 12 kW

etaLINK 12000 - industrial wireless charging agv and forklift - electric vehicles- 12kW - best product wireless power transfer- winner
etaSTORE

Lithium batteries for inductive charging

Wiferion etaSTORE LFP - Battery - Batterie - Lithium Ion Battery - Industrial LiFEPo - Lithium Ionen Batterie für FTS, FFS, Flurförderzeuge und AGV
etaTRAY

Retrofit for your forklift battery

etaTRAY - 48v batterie trog - wireless charging with retrofit tray - kabelloses laden mit batterietrog - ffs, fts, routenzug - staplerbatterie - akku - industrie akku laden

Get access to our charging simulator and learn more about battery charging stations


    *required

    Start typing and press Enter to search